GET YOUR INSPECTION DONE – Anywhere. Anytime. Fast.
Non-Destructive Series Inspection High Volume. Low Cost Per Part.
Industrial CT series inspection from Microvista – economical, reliable, scalable. Lab, mobile, or cloud-based – we have the right solution for your production.
High volume = low cost per part
CT-based non-destructive series inspection is the most economical form of quality assurance for complex parts in high volumes. Cost per part decreases as volume increases – and Microvista provides the complete infrastructure: CT lab, mobile CT, or automated cloud evaluation.
- Achieve a capable / controlled production process
- Reduce costs of further processing parts with hidden defects
- Prevent batch blocking with Microvista quality certification
Typical inspection tasks in series production
A single CT scan delivers all the following information simultaneously – no separate inspection method needed.
Pores, Voids & Inclusions
Reliably detect volumetric defects in cast and sintered parts
Burrs & Core Residues
Detect chips and core remnants in cavities – even hidden ones
Crack Inspection
Make hairline cracks and cold shuts visible in 3D
Porosity Analysis
Precisely quantify pore distribution and volume fraction
Wall Thickness Measurement
High-precision wall thickness measurement across the entire volume
CAD Comparison
Color-visualize deviations from the CAD model
Assembly & Joint Defects
Non-contact inspection of welds, press fits and adhesive bonds
Hairpin Stators
Complete quality inspection of e-motor windings and stator packs
Non-destructive testing methods compared
Why industrial CT is the superior method for complex series parts
X-Ray Diffraction (RT)
Limited- 2D images only – no volume data
- Expensive equipment & long inspection times
- Limited defect detection for complex geometries
Ultrasonic Testing (UT)
Limited- Unreliable for thin or hollow parts
- Poor coupling on rough surfaces
- No full volume scan possible
Magnetic Particle & Penetrant Testing (MT/PT)
Restricted- Only surface defects detectable
- Limited to specific materials
- No cavities or internal structures
Visual Testing (VT)
Restricted- Only externally visible defects
- Highly inspector-dependent
- No internal defects detectable
Industrial CT (Microvista)
Recommended- 3D volume images for every scan
- Cracks, pores, dimensions & joint defects in ONE pass
- 100% non-destructive – part remains intact
How can series inspection be realized?
Three paths to the most economical quality assurance for your production
01 CT Lab by Microvista
Ship parts to us – Microvista experts scan & evaluate. No investment costs, no personnel expense, no training. The ideal option for individual parts, batch approvals, or recurring series inspections.
02 Mobile CT Rental – ScanExpress
On-site inspection at your facility – no need to ship parts. The mobile ScanExpress CT gives you full flexibility and saves high investment and waiting costs.
03 Microvista Cloud
Already own a CT? Upload your scan data to the Microvista Cloud for automated evaluation. Saves significant time – manual evaluation is completely eliminated.
Our Measurement Capabilities
Microvista uses a 450kV tube with exceptionally high photon energy – enabling non-destructive inspection of thick-walled iron castings up to approx. 70 mm wall thickness.
Our Series Inspection Solutions
Customized inspection systems for every production requirement
Inline CT
CT inspection directly in your production line – fully automated, cycle-time capable, 100% coverage without downtime.
Learn more100% Inspection
Complete quality control for every single article. No part leaves production without quality certification.
Learn moreAI Automation
Intelligent defect detection without manual intervention. Faster, more reproducible, and cheaper than manual evaluation.
Learn moreFor prototypes, first articles, and failure analysis, we offer fast CT lab analyses with maximum precision.
Ready for 100% quality?
Let us plan your series inspection together. Non-binding consultation and individual ROI calculation.